A Simple Plan:

Standard Colors for Your Underground Utilities

Underground utilities can easily be identified today. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. Today, the risks have been lessened although not completely eliminated. It is thus important that we know how to identify these underground utilities if there is a need to dig the ground so that you can prevent harm. Before digging through a certain piece of land, the OSHA requires that the underground utilities be located. You dont want something disastrous to occur. If you hit any of the underground utility lines while digging then you can be fatally injured. It can also interrupt services in your area where the line is located. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.

But, despite the marks, there will sill be accidents. The reality is that there is an incident almost every 6 minutes where utility line are struck. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. Public heath and safety is affected when this happens.

Companies can locate utility lines through the use of GPR or Ground Penetrating Radar. This has made it easier to locate utility lies underground and other important things. Companies can locate their utility lines if any property owner calls 811.

Today, utility lines are marked with different colors for easy identification. Here are the colors used for different utilities.

White lines are for proposed excavation sites. You can mark areas with white lines that will soon be excavated.

Pink lines are temporary survey markings. These are used by surveyors to mark off legal property boundaries.

Red lines are used to mark electric power lines, cable, conduit, and lighting cable. This color is appropriate for electrical works since it is associated with fire and danger.

If you see yellow lines, then they are lines for gas, oil, steam, petroleum, and gaseous materials. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.

Communication, alarm, signal lines, cable, or conduit use orange lines. If you see blue lines then these are lines for potable water. If you see purple lines, that this is for reclaimed water, irrigation and slurry lines. Sewer and drain lines use the color green. Hitting this line can truly derail any project for a long period of time.

You can learn more about the color coding of utility lines if you click here now! View here for more.